TYPE A Standard Leads
Leads 10" standard crimp connected externally.
Insulated with fiberglass sleeve.
Leads 10" standard crimp connected externally.
Insulated with fiberglass sleeve.
Type B All Flexible Leads
Leads 10" standard internally connected. Does
not have any external modification, allows
complete flexibility.
Leads 10" standard internally connected. Does
not have any external modification, allows
complete flexibility.
Type C Teflon Seal & Leads
Requires 1" cold section on lead end.
Requires 1" cold section on lead end.
Type D Flexible Conduit
12" flexible conduit over 14" leads. Diameter of
cable does not exceed heater diameter.
12" flexible conduit over 14" leads. Diameter of
cable does not exceed heater diameter.
Type R Right Angle Conduit
12" flexible conduit exit at right angle over 14" leads.
12" flexible conduit exit at right angle over 14" leads.
Type F Right Angle Leads
Metal capped end disc. Requires 5/8" cold end
on top. Cannot be applied to stock.
Metal capped end disc. Requires 5/8" cold end
on top. Cannot be applied to stock.
Type G Ceramic Band Heat Resistant Over
Bare Leads. 6" beads over 6 1/2" leads. Good for
Temperatures to 1100 deg. F
Bare Leads. 6" beads over 6 1/2" leads. Good for
Temperatures to 1100 deg. F
Type H NPT Pipe Fittings
1/4" Dia. requires 1/8-27 NPT
3/8" Dia. requires 1/4-18 NPT
1/2" Dia. requires 3/8-18 NPT
5/8" Dia. requires 1/2-14 NPT
3/4" Dia. requires 3/4-14 NPT
1/4" Dia. requires 1/8-27 NPT
3/8" Dia. requires 1/4-18 NPT
1/2" Dia. requires 3/8-18 NPT
5/8" Dia. requires 1/2-14 NPT
3/4" Dia. requires 3/4-14 NPT
Type J NPT Pipe Fittings with Teflon Seals
Requires 1" cold end. Cannot be applied to stock.
Requires 1" cold end. Cannot be applied to stock.
Type L Right Angle Conduit with Copper Elbow
10" flexible conduit over 12" leads.
10" flexible conduit over 12" leads.
Type K Flange Fitting
1/16" thick x 1/2" Dia. with 2 No. 10 mounting
holes on 1-1/8" centers.
1/16" thick x 1/2" Dia. with 2 No. 10 mounting
holes on 1-1/8" centers.
Type M Internal Thermocouple Leads
Thermocouple iron-constanton std. Please specify
location. Cannot be applied to stock.
Thermocouple iron-constanton std. Please specify
location. Cannot be applied to stock.
Type N Straight conduit with Copper Coupler
10" flexible conduit over 12" leads.
10" flexible conduit over 12" leads.
Type P Braid Protection Lead
12" Stainless steel braid over 14" leads.
12" Stainless steel braid over 14" leads.
Type Q Right Angle Braid
Stainless steel braid exit at right angle over 14" leads.
Stainless steel braid exit at right angle over 14" leads.
Type S Screw Terminal
Provide quick, secure connection with ring or fork
connectors. Available on 1/2", 5/8", 3/4" and 1" Dia.
Provide quick, secure connection with ring or fork
connectors. Available on 1/2", 5/8", 3/4" and 1" Dia.
Type T Immersion Heater
Double ender fittings available in Brass,
Steel and Stainless Steel
Double ender fittings available in Brass,
Steel and Stainless Steel
Type U Sealed End
Available with Silicone Epoxy or Cement seal.
Available with Silicone Epoxy or Cement seal.
| Industrial Thermo Products stocks a variety of cartridge heaters available in many different sizes and lead terminations. View the list below to determine the style best for your application. |
| CARTRIDGE HEATERS - STYLES & LEAD TERMINATIONS |
Click here to go to the
Conversion Data page.
Conversion Data page.
 | |  | |  | |  | |  | |  | |  | |  |