 | |  | |  | |  | |  | |  | |  | |  |
MINI COIL HEATERS
Mini coil heaters or mini band heaters lend themselves to a
variety of applications. The most common application is nozzle
heaters for hot runner manifolds. We have available a
complete line of OEM replacement heaters for Husky, Tradesco
and others. Below we have listed the most common sizes.
Mini coil heaters or mini band heaters lend themselves to a
variety of applications. The most common application is nozzle
heaters for hot runner manifolds. We have available a
complete line of OEM replacement heaters for Husky, Tradesco
and others. Below we have listed the most common sizes.
| TECHNICAL DATA |
Sheath Material SS304
Insulation Material High Purity
Heating Elements NiCr 80:20 220 V
Voltage Range to 240 V
Power Rating 168 W to 300 W
Power Tolerance +5%
High Voltage Strength Min. 800V-AC
Insulation Resistance >5w
Sheath temperature of Heating element Max. 750C
Variation Round - 1mm, 1.5mm & 1.8mm
Rectangular - 1.3 x 2.1
Clamping Style Screw Clamp & Axial Clamp
Unheated Length 5" & 7"
Insulation Material High Purity
Heating Elements NiCr 80:20 220 V
Voltage Range to 240 V
Power Rating 168 W to 300 W
Power Tolerance +5%
High Voltage Strength Min. 800V-AC
Insulation Resistance >5w
Sheath temperature of Heating element Max. 750C
Variation Round - 1mm, 1.5mm & 1.8mm
Rectangular - 1.3 x 2.1
Clamping Style Screw Clamp & Axial Clamp
Unheated Length 5" & 7"
- COMPLETELY INTERCHANGEABLE WITH ORIGINAL OEM EQUIPMENT
- USES THE SAME THERMOCOUPLE AND RETAINING CAP
- FASTER RECOVERY DUE TO HIGHER THERMO MASS
- DESIGNED TO PROVIDE A BETTER HEAT PROFILE
Bi-Metal Heaters are a direct replacement for existing Husky 750 series heaters. This design enhances
performance by providing additional thermo mass allowing for an overall better heat profile and faster
recovery times for high temperature applications.
The nickel plated inner busing not only offers an improvement in high temperature application. It also
provides more controllability over the full temperature spectrum than the original OEM aluminum
version, this results in a smoother operation process.
performance by providing additional thermo mass allowing for an overall better heat profile and faster
recovery times for high temperature applications.
The nickel plated inner busing not only offers an improvement in high temperature application. It also
provides more controllability over the full temperature spectrum than the original OEM aluminum
version, this results in a smoother operation process.
| HUSKY HOT RUNNER REPLACEMENT HEATERS |
Click here to go to the
Conversion Data page.
Conversion Data page.